Chemigem D10 has replaced the DM52 - your complete automated pool system management. Great as an add on for saltwater pools! Most salt chlorinators do not keep up with chlorine demand during the hotter months. The Chemigem D10 will only add chlorine when it's required. Plus it will automatically add acid when the pH increases too!
The Chemigem D10 is a unit designed specifically for the domestic pool and spa owner. This is the smallest model and is built to withstand wide variations in water condition, climate and environments.
Take the guess work (and hard work!) out of adding chemicals
Efficiency and Control Whenever your pump is running, your Chemigem is working. The Chemigem tests the water continuously and can add chemicals over 30 times each hour. The Chemigem measures pH (a measure of the acidity of the pool water) and ORP (Oxidation Reduction Potential – a measure of the level of effective chlorine in the water). It is important that both pH and ORP are maintained within a safe range.
This Chemigem D10 controller provides a fully automatic chemical management system for the two chemical values, that of Chlorine and pH, which require the most frequent attention in a swimming pool or spa. Chemigems are each effectively two controllers in one in that they monitor and correct the Chlorine and pH levels concurrently.
Works off suction. No feeder pumps required! Less moving parts.
A simple low cost solution for manually feeding chlorine the safe way into your pool. Works off your filter pumps suction. No need to worry about feeder pumps. Download the brochure.
