LED Pro Plastic Colour Change Pool Light
Price includes light, mounting bracket, transformer, 20m cable & remote controller. The light has a diameter of 260mm and a depth of 60mm. For new pools or retro fitting into existing pools. Uses 252 super bright LED's.
Red, green and blue are first with combinations of these colours next.
5 gradual automatic colour changing modes are next.
2 high-intensity disco modes are split by a slow fading 7 colour mix.
The last of the 16 modes is a combination of red, green and blue which gives out the brightest of the colours and highlights the interior of your pool.
One of the largest & brightest LED pool lights on the market. This beautiful light has 252 LED's and has a white plastic rim & will enhance the look of any pool.
Note the links below for fitting instructions.
Correct placement in pool:
 |
Because the lights are so bright you don't need 2 or 3 lights up the side of your pool like standard lights. It is recommended to place just the one light at one end of the pool to get the best effect, this will also reduce the shadow effect that you might get in the corners if you place it on the side of your pool. |
| Rear View of Light
|
Remote Wiring Instructions
1. Remove smaller lower front cover from receiver.
2. Fit wires as per diagram.
4. Press the ON button for channel 1 on the transmitter AND the front button on the receiver at the SAME time until a click is heard from the receiver.
5. Your remote will now read the receiver you have just wired. | | | | |
|
Fitting Instructions
Cable Splicing Instructions
Remote instructions
|
