LED Pro S/Steel Colour change pool light
Price includes light, mounting bracket, transformer, 20m cable & remote controller. For new pools or retro fitting into existing pools. Note the cable splicing instructions below if retro fitting using your existing light cable.
| Here is an example of what these lights can do in the disco mode.
This light has 16 different colour change modes from soft ambient to party strobe. One light is all you need for the average pool size
The video at right is an actual pool with one of these lights fitted. |
|
One of the brightest LED pool lights on the market. This beautiful light has 252 LED's and has a stainless steel rim & will enhance the look of any pool. Comes complete with 12v transformer & 20m cable & remote controller. Can also be retro fitted to most existing light brackets. . The light has a diameter of 230mm and a depth of 40mm. 1 year warranty
Note the link for fitting instructions.
Correct placement in pool:
Because the lights are so bright you don't need 2 or 3 lights up the side of your pool like standard lights. It is recommended to place just the one light at one end of the pool to get the best effect, this will also reduce the shadow effect that you might get in the corners if you place it on the side of your pool.
| Rear view of light:
|
Remote Wiring Instructions
1. Remove smaller lower front cover from receiver.
2. Fit wires as per diagram.
4. Press the ON button for channel 1 on the transmitter AND the front button on the receiver at the SAME time until a click is heard from the receiver.
5. Your remote will now read the receiver you have just wired.
|
Fitting Instructions
Cable splicing instructions
Remote Instructions
|
