1 Litre Liquid Floc
A concentrated floceulent used to combine fine particles that causes cloudy water.
Formulation details: Poly Aluminium Chloride complex plus Polymer.
| PROPERTIES |
|
| |
|
|
| |
- Floc most pools in six hours.
- Restores clarity in the cloudiest pool water.
- Use to remove dead algae and other floating particles.
- No messy residue.
|
 |
| |
APPLICATION RATES |
|
| |
|
|
| |
- 1 litre per 50,000 litres.
|
| |
| |
| POOL VOLUME |
INITIAL DOSE |
| 30,000 L |
600 ml |
| 50,000 L |
1 L |
| 70,000 L |
1.4 L |
| 100,000 L |
2 L |
- Do not run Maxi-Floc through the pool filtration system. Use the recirculate setting where available. Otherwise remove the filter grids prior to application of Maxi-Floc.
- The dosage of Maxi-Floc is critical (as with all Alum type preparations). There are many complex factors which determine the concentrations of Maxi-Floc required to ensure effective coagulation. Unless sufficient Maxi-Floc is used, floccing acitivity will be minimal.
- When using Maxi-Floc in water containing high concentrations of positively charged ions (salt water pools) be aware that the overall floc size is reduced. This will result in a floc of lighter appearance and intensity than otherwise might be anticipated
|
|
