Check for a Manual
Check for a Brochure
Check for Installation Instructions
Check for Spare Parts Diagram
Check for MSDS
Luxapool SEF (Structural Epoxy Filler) is a fully formulated, underwater grade, 2-pack epoxy filler designed for surface repair & medium/fine surface filling prior to the application of Epoxy pool paint. Can be used all pool surfaces.
All surfaces to be filled should be free from oil, grease & other contamination.
Application is by trowel, spreader or similiar.
Touch dry within 2 hours. Recommended recoat with Luxapool Epoxy Paint, depending on temperature & humidity is 6-24 hours. Full cure is obtained after 72 hours at 25 deg.
Mix equal quantities of Part A with Part B in a clean plastic or metal can or similiar. Mix thoroughly until an even colour results across the whole quantity. Use product immediately after mixing.
Due to high demand, we recommend reaching out to us directly for the most up-to-date stock.
Thanks for subscribing!
This email has been registered!
Take 20% off your first order
Enter the code below at checkout to get 20% off your first order