Check for a Manual
Check for a Brochure
Check for Installation Instructions
Check for Spare Parts Diagram
Check for MSDS
Jetvac pool cleaner hose replacements - Genuine factory spare parts
White starter hose - JV501 0.6m long
Dark Blue hose - JV502 Feed hose 4.2m long -This is the middle Jet Vac Hose. It is located between the White Starter Hose JV501 and the Light Blue JV503 hose.
Each Hose is connected with a Jet Vac Swivel JVD5 which uses two mender nuts to retain the applicable hose to each side of the swivel.
After time this hose can look light is colour. So be careful when ordering - This DARK blue hose is in between the White starter hose and the Light blue hose
Light Blue Hose - JV503 Feed hose 4.9m long - This hose connects to the Jet Vac Pool Cleaner. The light Blue is the most flexible of the hoses to allow the cleaner to move freely around the pool. Each Hose is connected with a Jet Vac Swivel JVD5 which uses two mender nuts to retain the applicable hose to each side of the swivel.
Installation
Never cut the light Blue Jet Vac Hose.The Dark Blue Jet Vac Hose is the only hose which is cut during installation. When setting up the Jet Vac Hoses, start by connecting all the hoses to the wall outlet, then taking the hoses to the furthest end of the pool. The hose should be 600mm longer than the furthest point. Any extra hose must be cut off the Dark Blue section JV502
Due to high demand, we recommend reaching out to us directly for the most up-to-date stock.
Thanks for subscribing!
This email has been registered!
Take 20% off your first order
Enter the code below at checkout to get 20% off your first order