pH Increaser / Soda Ash 2 kg

Pool Rangerd

Optional Extras

pH Increaser for pools and spas. Also known as Soda Ash.


How to use pH Increaser 

  • Do not add near the skimmer or metal fittings in Pool.
  • Add pH Increaser as needed to maintain a pH reading of 7.2 to 7.6.
  • Do not add more than 10 grams per 1,000 litres at any one time.
  • After adding 10 grams per 1000 litres wait 24 hours and retest.
  • Dosage rates are only a guide.
  • Please note: pH increase does not increase the Total Alkalinity. 
  • For best results dissolve the pH Increaser in a bucket of water before adding to the pool in front of the pool inlet with the filter running.
  • Allow the filter to run for 4-5 hours before retesting the pH of the pool water.

 When purchasing, tap the edit cart link to see what freight you pay.


Good stuff

By: jennifer simmonds on 19 November 2020
If you can't find soda ash anywhere cheaper, simply from a factory or whatever, then this is a good quality product that will increase the pH fairly quickly. I have to say, no matter what people say, the necessity for pH to be UP to a certain level in your pool has NEVER been an issue for me with good floc, so I would say if you need this, then do it, but do try a bit of floc first without panicking. This product i use simply to keep all the pool balanced, not just for flocking which often doesn't need the required pH level, but it IS one of the better products should you desire some.

Write a product review

Others Also Bought

More From This Category