Saltigem SG Series Chlorinator
With Optional pH upgrade
Saltigem SG Series chlorinators are designed with an easy to use L.C.D display and touch pad operation. It is supplied with a quartz digital timer with multiple filter cycles. Features high and low salinity warnings, and regulation of the cell current.
Available in a 20g/hr and 30g/hr - Select from the drop down list
The operation of Saltigem is simple - put salt into the pool and the Saltigem cell energises the chloride part of the salt thus converting it to free chlorine. When the free chlorine has done its job (of killing micro-organisms in the pool) it reverts back to chloride again.
To all intents and purposes, Saltigem is a recycling machine for keeping your pool healthy. Saltigem needs very little salt to operate effectively - half the salt required by other brands of salt chlorinator. A Saltigem SG unit needs just 3 grams of salt per litre to function. You will hardly notice that it is there. Clear, sparkling water and happy, healthy swimmers - Saltigem and Pool Controls.
The Saltigem SG series uses its versatile timer system to periodically reverse the cell polarity to keep the cell electrodes free of scale. This almost eliminates maintenance of the system.
Saltigem uses an advanced process-based timer, not an old fashioned mechanical type that can be fouled by insects (thus voiding the warranty). The timer is simple to set up and makes seasonal adjustments a breeze. Instead of adjusting filter cycle times, up to 4 cycles can be added so that making seasonal adjustments is a matter of selecting a number between 1 and 4.The LCD display shows you what the timer is doing and when it will next start or stop. If the unit is turned on for a quick swim and the user forgets to turn it off, it will simply turn off at the next off time. There is even a provision for running the unit for a set period from 1 to 48 hours - great for a quick swim, filtration boost or super chlorination. The unit will also allow an external timer to take control if a home/pool automation system is already installed.
A big killer of pumps is dry running. Saltigem will monitor the cell for a gas build-up (when the water flow stops). If gas is detected in the cell not only will it be turned off, but another timer is activated to turn the pump off in around 2 minutes. This will save your pump from a quick death while still allowing time for your filter system to prime.
This feature can also limit your back washing in case you forget to stop it.
Saltigem has a simple yet versatile control system for operation and programming. Options are shown on the LCD display and only the buttons that can be used for the next programming selection are backlit to prompt the user. The processor doing all the "heavy lifting" is a modern FLASH based type that remembers how it is programmed if the power runs out, with a NiMH rechargeable back-up battery to keep the clock running in case of power failures. The timer also runs the polarity reversal system in the Saltigem SG series to avoid uneven cell wear - even if the power is removed sometimes. The timer can run an optional light transformer, so that pool lighting can be turned on and off automatically.
Some other control features:
- Fully regulated cell current with pulse width modulation-based system output control
- Time-division averaged conductivity measurement with integrated manual temperature compensation - used to make sure you have the right amount of salt in the water, and the cell is not being overloaded
- Overload shutdown - stops the cell if there is an overload (e.g. salt in skimmer) and rechecks every hour to see if has cleared
UPGRADE TO AUTO pH CONTROL - PLUG & PLAY - NO PROBE REQUIRED!
Unique to Pool Controls: a new form of pH Control without a pH probe - saving you money and maintenance time. The computer running the Saltigem unit uses internal data and cell measurements to predict pH changes.
It then calculates when and how much acid to add to your pool to keep the pH in range. You can even set a manual dose for large adjustments - e.g. after adding buffer. This unit utilises "plug and play" technology so installing pH valves to existing units is simple.
The pH upgrade option will cost an extra $390.00
Why do I need to adjust pH?
When chlorine is added to water the pH always changes – this is because chlorine is not a neutral chemical.
The pH will slowly rise as chlorine is produced in a salt water system. A rise in pH greatly reduces the effectiveness of the chlorine as a sanitiser, so it is important to ensure that the pH remains in the correct range.
The pH of the water can be lowered by the addition of acid – and if your SaltiGem has the optional pH control, this can be done automatically.
TheSaltiGem uses a sophisticated algorithm to calculate how much chlorine has been produced by the cell, and how much acid needs to be dosed to correct the resultant pH rise.
Be The First To Review This Product!
Help other Direct Pool Supplies users shop smarter by writing reviews for products you have purchased.