Spanet SV Mini complete with Touch Pad and Heater.
Setting a new standard in entry level spa controls, the SV Mini is the small spa control with the big spa features
Great for retro fitting into old spas too...
Add a WiFi Smart Link Adapter - Details here...
SV Mini 230 volt outputs
PUMP 1 , Circ Pump, 1 Speed Pump, 2 Speed Pump (the pump on this outlet must be pushing water through the heater)
AUX, 1 Speed Pump or Blower
230V, this outlet has a constant 230 volts and is not switchable (can be used to power a heat pump or any other item requiring a constant 230volts)
O3/UV, this outlet is only to be used with an ozone system
SV Mini low voltage ouputs
1 x Touch pad outlet
1 x Light (can only fit a Spanet SV Series Light in 2.5" or 5")
1 x Heat Pump Port
1 x Wifi Port
SV Mini Power Ratings - Select from drop down list above...
Input Voltage: 220-240 volt 50/60hz
Rated with mains lead: 10 / 15 amp max (1.5Kw / 2 Kw)
Rated when hard wired: 25 amp max (3Kw unit only)
Current rating: The 1.5Kw & 2Kw units are supplied with a 10 amp/15 amp lead and plug but the lead can be removed and the SV Mini can be hard wired with a 25 amp power supply.
SV Mini Features
*In heater temp sensor
*Max Temp 41deg
*Heat Pump Interface
*Programmable Load Shedding
Control box: 315W x 210H x 85D mm
Power lead: 3m
Heater including unions: 310W x 135H x 100D mm
Heater Power Lead: 1.5m (heater lead is hard wired into the controller)
Heater Data Lead: 1.5m
Touch Pad Face Size: 130W x 60H x 30D mm
Touch Pad Hole Size 110W x 40H mm
Touch Pad Lead: 2.3m