Xylem Ecocirc Premium Pump with Digital Flow / Pressure / Watts Display


Xylem Lowara ecocirc PREMIUM 15-6/130 hot water circulation pump with display.

The display shows in turn: Power in Watts, Head pressure, and flow rate which assist in correctly setting the pump to the application to maximise efficiency and performance.

3 standard modes: Constant Speed - Speed remains constant independant of flow - dial knob 1-7 (this would be the most common setting for heat exhanger applications on pools and spas)

Proportional Pressure - Pump automatically decreases speed for low flow/increases for higher flow Constant Pressure - Head pressure can be adjusted with the dial knob to maintain constant pressure independant of flow Automatic Air Purge - Purge trapped air from the pump.

Standby - When the pump is not needed. The 7 position dial is used to adjust flow to the correct level to ensure that the temperature differential between inlet and return from the heat exchanger / heat source are correct for maximizing performance.

Max head - 5.7m Max flow - 3200 litres per hour / 53 litres per minute Max system pressure - 10 bar Temp range of pumped fluid -10 degrees C to 110 degrees C. (must not freeze. Fluid temp must always be higher than ambient temp)

Permitted pumped fluid - Water or water/glycol mix.

Installation - pump must be installed with motor horizontal, or with motor vertical AND pump at the top.

Plumbing connection - Male Thread - 1" BSP (no unions/fittings are included) 200-240v, 50/60Hz, 4-42w IP44 NB - this is a hot water circulator only - it is not for use as a spa circulation pump alternative. Its for use on a closed system primary heat source from a boiler, gas heater, solar, etc



Be The First To Review This Product!

Help other Direct Pool Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category