Check for a Manual
Check for a Brochure
Check for Installation Instructions
Check for Spare Parts Diagram
Check for MSDS
Back Order
- Expected Arrival Date: 2 Weeks
LX Hydromassage WP-250-II high flow two speed spa jet pump
Used on numerous Chinese manufactured / imported spas
Pre-fitted with AMP cord to suit Aeware in.ye and Balboa, AMP plug on this pump does NOT suit Spanet or Spaquip controllers. An alternate cord with over-moulded plug is required at an additional cost or re-use the original cord.
Supplied with 50mm / 2" unions. 230v, 50Hz,
Low speed 0.53hp,0.4kw, 2.5A
High speed 2.5hp, 1.85kw, 9A
*If the cable is being replaced, please note that high and low speed wire colours differ from all other brands. ie LX use black as High speed and brown as Low speed.
Most other cords are the other way around. If your pump runs on high speed for filtration and heating the wiring is in reverse*
2 year parts only warranty on LX pumps
Due to high demand, we recommend reaching out to us directly for the most up-to-date stock.
Thanks for subscribing!
This email has been registered!
Take 20% off your first order
Enter the code below at checkout to get 20% off your first order
