Aquaspa Chlorine Remover 500ml

Aquaspa Chlorine Remover 500ml

SKU: 52AQCR500M
i
In Stock, Ships Now
$13.00
$24.50
$13.00
Save $11.50
Aquaspa Chlorine Remover 500ml

Aquaspa Chlorine Remover 500ml

$24.50 $13.00

Aquaspa Chlorine Remover 500ml

$24.50 $13.00
AquaSpa by Lo-Chlor
Removes chlorineAnd bromine
Essential switch stepBefore first AquaSpa dose
Fast-actingConfirmed clear in 30 min
AquaSpa is a chlorine and bromine-free spa sanitation system developed by Lo-Chlor. The range covers sanitiser, shock, clarifier, water balancers, and filter and pipe care for residential spas, hot tubs and swim spas.
AquaSpa - Maintenance
Chlorine Remover - 500ml
Removes chlorine Removes bromine Switching essential Before first dose
🧪 What it does

AquaSpa Sanitiser and chlorine cannot coexist. Chlorine deactivates the polyhexanide biocide at the heart of the AquaSpa system, which means any residual chlorine in the water at startup will prevent the sanitiser from working. AquaSpa Chlorine Remover neutralises chlorine and bromine quickly, clearing the way for the AquaSpa system to begin.

There are two scenarios where this product is essential: switching from a chlorine or bromine spa system, and filling a new spa from a tap that uses municipal water treatment. Town water contains chlorine at low levels. Without Chlorine Remover, even a fresh fill from the tap will interfere with the first sanitiser dose.

AquaSpa Chlorine Remover details

  • Neutralises chlorine and bromine in spa and hot tub water
  • Essential first step when switching to the AquaSpa system
  • Removes chlorine from municipal tap water before first dose
  • Fast-acting, concentrated formula
  • Compatible with all AquaSpa chemicals
  • Does not affect pH, alkalinity or calcium hardness levels

After using Chlorine Remover, confirm chlorine levels are at zero with the 4-in-1 Test Kit before adding AquaSpa Sanitiser. Also run Pipe Klenz before filling if switching from a chlorine system.

📏 How to use

Add to the spa after filling with fresh water and before the first sanitiser dose.

Fresh tap water
50ml
per 1,000L
Add to freshly filled spa. Circulate for 30 minutes, then test to confirm chlorine is at zero before adding sanitiser.
Switching from chlorine
100ml
per 1,000L
After draining and refilling the spa. Allows for higher residual levels from the previous system.
If chlorine was added by mistake
As needed
test and re-dose
Add Chlorine Remover, wait 30 minutes, test. Repeat until zero. Do not dose sanitiser until confirmed clear.
❓ FAQ
My tap water has low chlorine levels. Do I still need this?
Yes. Even low-level chlorine in tap water is enough to interfere with AquaSpa Sanitiser. Dose Chlorine Remover with every fresh fill before adding the sanitiser, then confirm with the test kit that chlorine reads zero before proceeding.
How do I know when the chlorine is gone?
Use the 4-in-1 Test Kit to test after 30 minutes. If the reading is still above zero, dose again and retest. Do not add sanitiser until you confirm zero chlorine.
Can I use Chlorine Remover if I accidentally added chlorine to an AquaSpa spa?
Yes. Dose Chlorine Remover, wait 30 minutes, and test. Repeat if needed until the reading is zero. You can then resume the AquaSpa routine once confirmed clear.
Does Chlorine Remover affect pH or alkalinity?
No. It specifically targets chlorine and bromine and does not affect pH, alkalinity or calcium hardness.

Related Products