AquaChek Salt Test Strips

10 Test Streips


Optional Extras

For instant salt test results, use the AquaChek Salt Titrators Salt Test. Pack of 10 strips. Each strip tests salt as Sodium Chloride.

How to use AquaChek Salt Test Strips

  1. Fill a small vial with a sample of your pool water.
  2. Place a strip into the water until the yellow band at the top of the strip turns dark - typically in 3 to 4 minutes.
  3. Compare the results on the strip to the number scale on the AquaCheck label to determine the salt concentration.

In just minutes AquaChek White titrators measure salt (sodium chloride) levels from 400 to 7,000 ppm.   With appropriate salt levels, you can rest assured that your salt generator will be able to produce the correct amount of chlorine to keep water clean and free of contaminants.

For a clean and healthy pool, test the water at each end a minimum of twice a week!

When purchasing, tap the edit cart link to see what freight you pay.


A Salt tester works

By: Boxy on 16 November 2021
This Pool Salt Tester works, and reasonably reliable. I used this tester on my previous pool for 3 years or so, and it worked then. With my new pool, I tried the AquaChek dip type test strips, and they not only weren't accurate enough, but stopped working after about 3 months. Don't get the dip-strip test type. This type needs the Test Strip to sit in 25mls of pool water for a few minutes until the gauge gives the salt PPM reading. The Instructions are right and should be followed. But the results are also reasonably reliable.

Write a product review

We Also Recommend

Others Also Bought

More From This Category