Algon Total Pool & Spa Care


Earn Loyalty Points


Available Options

Algon's has all the swimming pool cleaning products you will ever need for total water clarity and Algae control.
Select your required product from the drop down list.
Floc - $20.00 ( Shake before use )
Clarifier - $20.00
Algae Killer - $26.00
MetalFree Algaecide - $28.00
Winteriser - $30.00
Hotzone Algaecide - $36.00

CLARIFIER - As the name implies - For pool water that is a little cloudy.
Turns the cloudiest pool water crystal clear. Greatly improves filter efficiency and does not alter PH.

For best results:

Calculate the correct dosage using the table provided and add ALGON’S CLARIFIER to your Spa and/or your pool water spreading it over as large an area as possible and keep your pump running until your pool water is clear.
Back wash your filter thoroughly.

ALGON’S ULTIMATE FLOC - Our strongest floc.
The Ultimate FLOC will restore clarity to the murkiest pool water. Instead of spreading Aluminium Sulphate (Allum) powder over the pool surface use Algon’s liquid FLOC. A Poly Aluminium Sulphate in liquid for ease of use and good results. Where the pool water is more that just cloudy.

For best results:

Set filter to re-circulate. If setting is not available, remove filter cartridge or grids.
Calculate volume of ALGON’S ULTIMATE FLOC from the table shown and mix in a plastic bucket.
Adjust Ph to between 7.2 & 7.6.
Add the diluted ALGON’S ULTIMATE FLOC to pool water by spreading it as much as possible.
Run pump for about an hour.
Leave pool with pump off and let ALGON’S ULTIMATE FLOC do the rest.
When the residue has settled (approx 5-6 hours) vacuum to waste.
Reset settings on filter or replace cartridge or grids and resume normal filtration.

ALGAE KILLER is a lower dose treatment for cooler climates or for more milder forms of algae
For general all-purpose algae control. Designed for the control of green algae and for general algae prevention. Also effective on mild cases of black algae.

ALGAE KILLER contains 28 gm/litre complex blend of copper salts.
Plus 20 gm/litre Benzyl ammonium Chloride.

For best results:

Check Ph of the water and adjust to between 7.2 & 7.6.
Maintain a good chlorine level.
Brush any heavy affected areas with a stiff brush.
Walk around your pool pouring ALGAE KILLER into the water
with your filter running.

METAL FREE - As the name implies. An algaecide that does not contain metal mainly copper.
A Polymer algaecide free of all metals especially copper for those who prefer an alternative.

For best results:

Adjust your pool water to between 7.0 and 7.8 (7.0 to 7.2 if algae is severe).
Brush walls and vacuum visable algae to waste (if possible).
Add ALGON’S METAL FREE as per dosage on the bottle and apply evenly around the edges of pool with filter running (not via skimmer). Wait 24 hours if pool has been superchlorinated.
24 hours following treatment brush pool walls and floor and remove settled algae by vacuuming.
Can be used in ponds at the same dosage. Do not use in ponds or water features with fish.
If algae persists drop the Ph of your pool water.

HOTZONE is 14.2% stronger than ALGATAC and Originally formulated for the hotter areas such as Queensland in Australia and in Fiji.
Specifically designed for very serious green, black or mustard algae, very effective in hotter climates and larger heated pools. Controls serious Black Spot and Mustard Algae.

HOTZONE contains 47.6 gm/litre complex blend copper salts plus Benzyl Ammonium Chloride.

For best results:

Check Ph of the water and adjust to be between 7.2 & 7.6.
Maintain a good Chlorine level.
Brushing with a stiff brush will help especially with stubborn Black Spot.
Walk around your pool pouring HOTZONE into water with the pump running
HOTZONE will greatly reduce your chlorine requirements.

WINTERISER maintains your pool throughout winter.
Developed to last up to 4 months to prevent your pool getting algae and makes Summer start up much easier.

WINTERISER contains 40 gm/litre complex blend of copper salts formulated for slow release over the winter months.

 For best results:

Vacuum your pool then clean filter system thoroughly by back washing.
Adjust Ph to between 7.2 & 7.6.
Add chlorine.
Wait 48 hours before adding ALGON’S WINTERISER at the recommended dosage.
Throughout winter remember to keep adding chlorine every 7 to 14 days and run filter approx 4 hours a day.
Don’t let the Ph climb above 7.6.
WINTERISER will greatly reduce your chlorine requirements over winter.

 When purchasing, tap the edit cart link to see what freight you pay.



Be The First To Review This Product!

Help other Direct Pool Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

Others Also Bought

More From This Category