Enviroswim ES3 Domestic Freshwater System

Complete Chemical Free PoolSystem

If you are looking for a chlorine/ hydrogen peroxide-free system for your pool this is the one and it is Australian Made!

This is a complete system tested and verified byNATA. Researched and shown to be 30 X more effective than conventional systems by government laboratories

It combines Ultrasonics, Ionisers and Electrode Oxidisation. You don't need to add anything else! It has been used in residential and commercial properties including resorts around the world!

Ecoswim chemicalfree pool system benefits:

• Environmentally Friendly- safe to use in your garden and no chlorine taste or smell!
• Reduces costs by up to 50%. Reduce pump run times and save money on ergery costs. The ES-3 runs for 1 hour a day per 10,000L
• Tested by government laboratories.
• Easily to convert from Salt water and Chlorine pool systems to a freshwater system
• The water is clean enough to drink. It was tested in New zealand and passed NZ water drinking standards.
• Installed by thousands of people
• Great for asthmatics, allergy sufferers, psoriasis, no redness, skin or eye irritaion.

Can Be Retrofittedin your existing pool

This can easily be retrofitted to your existing pool you don't need to replace your pump or filter. The only item you need to buy/replace to use this system is the electrodes which require replacing every 18-24 months

Save Money withon pool energy and chemical costs with Enviroswim

Reduces pool maintenance and chemical costs and saves you time, save around $1000 a year!

With the Enviroswim ES3 Freshwater system there isno need to add:

• Liquid chlorine
• Granular chlorine,
• Non chlorine oxidiser,
• Hydrogen peroxide,
• Stabiliser
• Algaecides & flocculant.

Low Ions

Don't mistake this system for a commonpool ioniser. The level of ions produced in water from the ES3 is very low, in fact 20% of the permitted amount in municipal drinking supplies. Making this an environmentally friendly product.

The Enviroswim patented stand-alone sanitiser has been tested and verified by leading and respected independent laboratories for its exemplary sanitizing capabilities.Certified by a world-renowned organization:

• Efficacy - proven in laboratory tests to meet pool and spa sanitising standards.
• Test for durability - continuous operation at 40¬∞C for 8000 hours without failure.
• A reliable reproducibility of output was demonstrated over the course of the test.
• During the test period, there was no staining of the pool surface.
• Tested for UV and freeze resistance - components pass UV and freeze resistance tests.
• Test on chemical resistance - components meet chemical exposure requirements.
• Test kits and manuals - meet readability and accuracy standards.
• Ul Tests- The test showed that allelectric components reached safety standards

It looks simple because it has been designed to be as easy to operate as possible and will only take a few minutes every week to maintain

How The ES3 Works- basic theory explained

There is no such thing as a maintenance-free pool. However, the EnviroSwim system requires only a few minutes each week to keep your pool in top conditionwhile it saves money. Here is some basic insight intothe theory of the processes at work on your pool when using the EnviroSwim system.

1. Ionization
The use of copper and silver to sanitize water is well documented and the process has been used for thousands of years.
Copper is a very powerful algaecide and silver is a very powerful biocide. When the two metals are combined and introduced to the water using electrolysis, they become aformidable sanitizer.
The required residual level of copper and silver introduced to the swimming pool is well below acceptable drinking water standards making for a very safe residual sanitizer.

2. Electronic Oxidization (ORP generator)

Traditionally copper and silver ionization systems have required an oxidizer to be added to the pool water to help burn out organic compounds (oils, dust, leave stains etc.). The most common form of oxidizer used for this purpose has been chlorine.There is a growing concern regarding the adverse health effects of chlorine and its associated by-products (Chloramines) EnviroSwim has eliminated the need to add chlorine to the pool by incorporating an electronic oxidizing unit into the system. ORP stands for Oxidation-Reduction Potential.In practical terms, it is a measurement of the ability to oxidize contaminants. ORP is the only practical method we have to electronically monitor sanitizer effectiveness.In some parts of the world, it is also known as Redox Potential.
Using electrolysis the EnviroSwim system produces the oxidizer in sufficient quantities to maintain an acceptable ORP.

3. Ultrasonics

Ultrasonics used in the EnviroSwim system further helps to improve the water quality by removing existing scale and preventing the formation of scale caused by silica in the water.

This process improves the efficiency and reduces the operating costs of the pool filtration/circulation and heating equipment.

The Enviroswim ES-3 is a revolutionary breakthrough in swimming pool technology that sanitises water without adding chemicals, except for pH balancing requirements. Using a powerful combination of silver and copper electrodes, ionization and ultrasonics, the system removes all the “nasties” from your pool and leaves you with pure, clean water.

Copper is an algaecide. Silver is an anti-bacterial agent. But they don't have oxidizing properties. If you try to run a pool just on copper and silver, you don't have anything to break down the organic compounds. So what we use for the oxidization part of the process is a combination of electronic oxidisation and ultrasonics.

The ES3 is less harmful, less expensive to maintain and more effective than conventional chlorine-based swimming pool systems.

The ES3:

• Kills bacteria in water that chlorine does not.
• Vastly reduces chemical usage.
• Eliminates chemical odors.
• Eliminates the need to add chlorine
• Increases pump life
• Uses less electricity in all facets of pool operation
• Eliminates almost all consumables

The Enviroswim E3 is the world's most innovative and efficient water sanitation system and it is truly eco-friendly.
Simply by installing the system in your pool, not only are you delivering a host of benefits to your family and friends, you'll be doing something really positive for the environment.

Chlorine:
Chlorides in pool water will produce some chlorine through the process of electrolysis while passing through the Enviroswim treatment cell. To minimise this reaction, Enviroswim uses freshwater that is very low in dissolved salts and solids. It also eliminates the requirement to add stabiliser (sunblock), another chemical of concern, designed to hold the chlorine in the water for longer. So the amounts of chlorine created by the system are minimal and quickly dissipated. The freshwater feel is immediately evident when entering Enviroswim water and is the number one feedback we get from new customers.

Includes:

• Wall mounted control unit

• Flow Cell (connects to pvc pipe on return line)

• ES3 copper/silver electrode x 2

• Ultrasonic system

• Electronic oxidising system

• Test Kit

• Installation Instructions

• Operating Instructions

• 2 Year Warranty

Product Brochure

Research

Risk Summary

Manuals:

User Guide
Installation guide

When purchasing, tap the edit cart link to see what freight you pay.